Novel silica based adsorbent layer-by-layer modified with polyhexamethylene guanidine and Arsenazo reagents for solid-phase extraction of lanthanides from lignites and products of their processing
URI (для ссылок/цитирований):
https://www.tandfonline.com/doi/full/10.1080/01496395.2020.1785500https://elib.sfu-kras.ru/handle/2311/142639
Автор:
Vladimir, Losev
Olga, Buyko
Sergey, Metelitsa
Elena, Borodina
Nikolay, Kuzmin
Aleksandr, Shimanskiy
Коллективный автор:
Институт нефти и газа
Институт цветных металлов и материаловедения
Центр коллективного пользования
Научно-исследовательская часть
Кафедра композиционных материалов и физико-химии металлургических процессов
Дата:
2020-06Журнал:
Separation Science and TechnologyКвартиль журнала в Scopus:
Q2Квартиль журнала в Web of Science:
Q3Библиографическое описание:
Vladimir, Losev. Novel silica based adsorbent layer-by-layer modified with polyhexamethylene guanidine and Arsenazo reagents for solid-phase extraction of lanthanides from lignites and products of their processing [Текст] / Losev Vladimir, Buyko Olga, Metelitsa Sergey, Borodina Elena, Kuzmin Nikolay, Shimanskiy Aleksandr // Separation Science and Technology. — 2020.Аннотация:
Novel silica-based adsorption materials layer-by-layer modified with polyhexamethylene guanidine and Arsenazo I or Arsenazo III have been proposed for solid-phase extraction of rare earth elements (REE). Silica, modified with Arsenazo I, quantitatively extracted REE at pH 5.5 − 7.0, and silica, modified with Arsenazo III, at pH 2.0–6.0 with distribution coefficients of 2.9 · 103–4.6 · 104 cm3 g−1. The adsorption capacity for REE was 1.25–2.85 mg g−1. Silica, layer-by-layer modified with polyhexamethylene guanidine and Arsenazo III, was used for removal of REE from solutions after digestion of lignites and ashes after their burning.
Коллекции:
Метаданные:
Показать полную информациюСвязанные материалы
Показаны похожие ресурсы по названию, автору или тематике.
-
Analysis of the metal layer thickness influence on the dispersion characteristics of acoustic waves propagating in the layered piezoelectric structure ‘‘Me/AlN/Me/diamond”
Burkov, S. I.; Zolotova, O. P.; Sorokin, B. P. (2016-12)The paper presents the results of computer simulation of the acoustic waves propagation in piezoelectric layered structures based on diamond substrate under the influence of various metal film deposition. It has been ... -
Metal Layer Thickness Influence on the Dispersion Characteristics of Acoustic Waves in the Layered Structure "Me/ZnO/Me/diamond"
Burkov, Sergey I.; Zolotova, Olga P.; Turchin, Pavel P.; Turchin, Vladimir I.; Sorokin, Boris P.; Бурков, Сергей И.; Золотова, Ольга П.; Турчин, Павел П.; Турчин, Владимир И.; Сорокин, Борис П. (Сибирский федеральный университет. Siberian Federal University, 2018-06)The research paper presents an analysis of the influence of mass loading represented by two metal layers (the upper and lower electrodes) on variations in the phase velocity of the elastic wave dispersion modes in the ... -
Metal Layer Thickness Influence on the Dispersion Characteristics of Acoustic Waves in the Layered Structure "Me/ZnO/Me/diamond"
Sergey I.Burkov; Olga P.Zolotova; Pavel P.Turchin; Vladimir I.Turchin; Boris P.Sorokin (2018)The research paper presents an analysis of the in?uence of mass loading represented by two metal layers (the upper and lower electrodes) on variations in the phase velocity of the elastic wave dispersion modes in the ... -
Metal Layer Thickness Influence on the Dispersion Characteristics of Acoustic Waves in the Layered Structure "Me/ZnO/Me/diamond"
Sergey I.Burkov; Olga P.Zolotova; Pavel P.Turchin; Vladimir I.Turchin; Boris P.Sorokin (2018) -
Analysis of the metal layer thickness influence on the dispersion characteristics of acoustic waves propagating in the layered piezoelectric structure ‘‘Me/AlN/Me/diamond”
Burkov, S. I.; Zolotova, O. P.; Sorokin, B. P. (2018)The paper presents the results of computer simulation of the acoustic waves propagation in piezoelectric layered structures based on diamond substrate under the influence of various metal film deposition. It has been ...