CHEMICALLY- BONDED BRICK PRODUCTION BASED ON BURNT CLAY BY MEANS OF SEMIDRY PRESSING
Скачать файл:
DOI:
10.1063/1.4937884URI (для ссылок/цитирований):
https://elib.sfu-kras.ru/handle/2311/27849Автор:
Voroshilov, Ivan
Ворошилов, Иван
Endzhievskaya, Irina
Енджиевская, Ирина
Vasilovskaya, Nina
Василовская, Нина
Коллективный автор:
Инженерно-строительный институт
Кафедра строительных материалов и технологий строительства
Дата:
2016Журнал:
AIP Conference Proceedings ADVANCED MATERIALS IN TECHNOLOGY AND CONSTRUCTIONКвартиль журнала в Scopus:
без квартиляБиблиографическое описание:
Voroshilov, Ivan. CHEMICALLY- BONDED BRICK PRODUCTION BASED ON BURNT CLAY BY MEANS OF SEMIDRY PRESSING [Текст] / Ivan Voroshilov, Иван Ворошилов, Irina Endzhievskaya, Ирина Енджиевская, Nina Vasilovskaya, Нина Василовская // AIP Conference Proceedings ADVANCED MATERIALS IN TECHNOLOGY AND CONSTRUCTION: AIP Conference Proceedings. — 2016. — Т. 1698. — .Аннотация:
We presented a study on the possibility of using the burned rocks of the Krasnoyarsk Territory for production
chemically- bonded materials in the form of bricks, so widely used in multistory housing and private house building. The
radiographic analysis of the composition of burnt rock was conducted and a modifier to adjust the composition uniformity
was identified. The mixing moisture content was identified and optimal amount at 13-15% was determined. The method of
semidry pressing has been chosen. The process of obtaining moldings has been theoretically proved, the advantages of
chemically- bonded wall materials compared to ceramic brick were shown. The production of efficient artificial stone based
on material burnt rocks, which is comparable with conventionally effective ceramic materials or effective with cell tile was
proved, the density of the burnt clay - based cell tile makes up 1630-1785 kg \ m3, with compressive strength of 13,6-20,0
MPa depending on the compression ratio and cement consumption, frost resistance index is F50, and the thermal
conductivity in the masonry is λ = 0,459-0,546 W \ m * 0C. The clear geometric dimensions of pressed products allow the use of the chemically- bonded brick based on burnt clay as a facing brick.