Step-Up Concentration Method for Chemical Agents’ AdsorptionMeasurement in Porous Media

Abstract

Before implementing any chemical enhanced oil recovery project at the field, it is very important to carry outa feasibility study, which is impossible without determining their effectiveness under laboratory conditions. The task of laboratory research is to determine all the parameters of surfactant and polymer solutions,necessary for further analytical evaluation and reservoir simulation. It is necessary to conduct laboratoryexperiments to perform technical and economic assessment of the chemical EORs implementation. One ofthe most important issues here is to determine the amount of reagent held in the pore space of the reservoir. The retention parameter determines how much reagent needs to be injected to achieve the requireddisplacement efficiency. It directly affects reagent consumption and economic efficiency. This paper discusses various methods for determining the amount of reagent retained in the reservoir;it can be surfactant species or a polymer. To solve the problem of reducing the time for the experimentalpart, an algorithm of an experiment was developed, which makes it possible to determine the retentionparameters in a shorter time and with less labor. This method was tested and showed its effectiveness inthe course of a technical and economic study on the possibility of implementing polymer flooding for afield in Eastern Siberia. As a result of the experiments, the relationships between the surfactant or polymer retention and theirconcentration, and also between permeability and the amount of reagent adsorbed were found. The effect ofsalinity on the retention parameter was determined, the fact of desorption for both surfactants and polymerswas revealed. Inaccessible pore volume for polymer was determined.