Показать сокращенную информацию
Study of the Influence of Conditions of Combined Casting and Rolling-Extruding and Two-Stage Annealing on the Structure and Properties of Semi-Finished Electrical Products from an Al–Zr System Alloy
Автор | Vadim, Bespalov | |
Автор | Sergey, Sidelnikov | |
Автор | Denis, Voroshilov | |
Автор | Yuriy, Gorbunov | |
Автор | Igor, Konstantinov | |
Автор | Ekaterina, Lopatina | |
Автор | Edvard, Rudnitskiy | |
Автор | Viktor, Berngardt | |
Автор | Olga, Yakivyuk | |
Автор | Alexander, Durnopyanov | |
Дата внесения | 2020-01-20T07:17:02Z | |
Дата, когда ресурс стал доступен | 2020-01-20T07:17:02Z | |
Дата публикации | 2019 | |
Библиографическое описание | Vadim, Bespalov. Study of the Influence of Conditions of Combined Casting and Rolling-Extruding and Two-Stage Annealing on the Structure and Properties of Semi-Finished Electrical Products from an Al–Zr System Alloy [Текст] / Bespalov Vadim, Sidelnikov Sergey, Voroshilov Denis, Gorbunov Yuriy, Konstantinov Igor, Lopatina Ekaterina, Rudnitskiy Edvard, Berngardt Viktor, Yakivyuk Olga, Durnopyanov Alexander // Key Engineering Materials. — 2019. — Т. 805. — С. 19-24 | |
ISSN | 10139826 | |
URI (для ссылок/цитирований) | https://www.scientific.net/KEM.805.19 | |
URI (для ссылок/цитирований) | https://elib.sfu-kras.ru/handle/2311/128938 | |
Аннотация | This article presents the results of the study of the joint effect of the processing conditions of the new composition of the Al-Zr system alloy by combined casting and rolling-extruding and two-stage annealing on the structure and properties of round bars used in the manufacture of heat-resistant wires. The research show patterns of changes in the properties, the specific electrical resistance of the bars, depending on different conditions of deformation and heat treatment of aluminum alloy with a content of 0.3% zirconium and 0.2% iron. The results of micro-X-ray spectral analysis and the granular structure of the samples before and after two-stage annealing confirming the stability of the structure after heating and preserving the strength of semi-finished products. Presented parameters of combined casting and rolling-extruding and two-stage annealing for the manufacture of rods from the studied alloy make it possible obtaining good combination of mechanical properties and electrical conductivity. | |
Тема | Aluminum Alloy | |
Тема | Conductive Semi-Finished Products | |
Тема | Electrical Resistivity | |
Тема | Grain Structure | |
Тема | Heat Resistance | |
Тема | Heat Treatment | |
Тема | Heat-Resistant Wires | |
Тема | Mechanical Properties | |
Тема | Twin Roll Casting-Extruding | |
Тема | Two-Stage Annealing | |
Тема | X-Ray Microanalysis | |
Тема | Zirconium | |
Название | Study of the Influence of Conditions of Combined Casting and Rolling-Extruding and Two-Stage Annealing on the Structure and Properties of Semi-Finished Electrical Products from an Al–Zr System Alloy | |
Тип | Journal Article | |
Тип | Journal Article Preprint | |
Страницы | 19-24 | |
ГРНТИ | 53.45.31 | |
Дата обновления | 2020-01-20T07:17:02Z | |
DOI | 10.4028/www.scientific.net/KEM.805.19 | |
Институт | Институт цветных металлов и материаловедения | |
Подразделение | Кафедра обработки металлов давлением | |
Подразделение | Кафедра металловедения и термической обработки металлов им. В. С. Биронта | |
Подразделение | Кафедра инженерного бакалавриата CDIO | |
Журнал | Key Engineering Materials | |
Квартиль журнала в Scopus | Q3 | |
Квартиль журнала в Web of Science | без квартиля |