Show simple item record

Zeer, G. M.
Zelenkova, E. G.
Beletskii, V. V.
Nikolaev, S. V.
Kozhurin, A. N.
Kuchinskii, M. Yu.
Grigor’Eva, O. A.
2017-06-16T10:24:52Z
2017-06-16T10:24:52Z
2015-12
Zeer, G. M. Microstructure and Properties of an Electrocontact Cu–(ZnO/TiO2) Material [Текст] / G. M. Zeer, E. G. Zelenkova, V. V. Beletskii, S. V. Nikolaev, A. N. Kozhurin, M. Yu. Kuchinskii, O. A. Grigor’Eva // Technical Physics. — 2015. — Т. 60 (№ 12). — С. 1823-1828
10637842
http://elib.sfu-kras.ru/handle/2311/32994
Текст статьи не публикуется в открытом доступе в соответствии с политикой журнала.
Abstract—A copper-based electrical-contact composite material hardened by disperse zinc oxide and zinc titanate is studied by electron microscopy and energy dispersive X-ray macroanalysis. The distribution of oxide phases in the samples containing 2.5 wt % oxide nanopowder mixture in an initial charge is found to be uniform. An increase in the amount of oxides leads to an increase in their sized in sintering. A relation between the sample wear and the sample composition is obtained during laboratory tests. It is shown that the introduction of more than 2.5 wt % oxide mixture results in intense wear of the working surface of the sample and an increase in the running-in period of contacts.
https://www.scopus.com/record/display.uri?eid=2-s2.0-84950315752&origin=resultslist&sort=plf-f&src=s&st1=Zeer&st2=&sid=4EB858165
electron microscopy
macroanalysis
Electrocontact Material
Microstructure and Properties of an Electrocontact Cu–(ZnO/TiO2) Material
Journal Article
Published Journal Article
1823-1828
53.39
2017-06-16T10:24:52Z
10.1134/S1063784215120270
Политехнический институт
Кафедра стандартизации, метрологии и управления качеством
Кафедра конструкторско-технологического обеспечения машиностроительных производств
Кафедра материаловедения и технологии обработки материалов
Technical Physics
Q3
Q4


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record