Показать сокращенную информацию

Абалымов В. Р.
Жереб В. П.
Клейменов Ю. А.
Антонов М. М.
2021-09-21T15:30:21Z
2021-09-21T15:30:21Z
2021
00260819
https://elib.sfu-kras.ru/handle/2311/143752
Статья из журнала. Научное издание.
Исследована возможность замены сплава AlSi7Mg0,3, используемого для производства литых автомобильных дисков колес, на эвтектический силумин, легированный магнием. Определены периоды кристаллической решетки, структура, твердость и механические свойства эвтектических и доэвтектических силуминов, проведен их сравнительный анализ. Показана возможность использования термически упрочняемого эвтектического силумина для изготовления литых автомобильных дисков колес взамен менее технологичного сплава AlSi7Mg0,3. The possibility of replacement of alloy AlSi7Mg0.3 used for the production of cast automotive wheel disks by eutectic silumin alloyed with magnesium is studied. The crystal lattice constant, the structure, the hardness and the mechanical properties of eutectic and hypoeutectic silumins are determined and their comparative analysis is performed. It is shown that the heat hardenable eutectic silumin can be used for making cast automotive wheel disks instead of the AlSi7Mg0.3 alloy less adaptable to manufacture.
The possibility of replacement of alloy AlSi7Mg0.3 used for the production of cast automotive wheel disks by eutectic silumin alloyed with magnesium is studied. The crystal lattice constant, the structure, the hardness and the mechanical properties of eutectic and hypoeutectic silumins are determined and their comparative analysis is performed. It is shown that the heat hardenable eutectic silumin can be used for making cast automotive wheel disks instead of the AlSi7Mg0.3 alloy less adaptable to manufacture.
ООО "Фолиум"
№ 6
http://elibrary.ru/item.asp?id=46327763
CASTing
silumin
quenching
aging
литье
силумин
закалка
старение
Влияние термической обработки на структуру и механические свойства эвтектического силумина, легированного магнием : научное издание
Journal Article
Абалымов В. Р.: ООО «ИК ЦТО»
Жереб В. П.: Сибирский федеральный университет
Клейменов Ю. А.: ООО «Литейно-механический завод «СКАД»
Антонов М. М.: ООО «Литейно-механический завод «СКАД»
3-7
Москва
Металловедение и термическая обработка металлов
46327763


Файлы в этом документе

Thumbnail

Данный элемент включен в следующие коллекции

Показать сокращенную информацию