Неорганические оксиды с функциональными группами феррозина и ференен С для сорбционного концентрирования и определения железа(II)
Скачать файл:
URI (для ссылок/цитирований):
https://link.springer.com/article/10.1134/S106193481803005Xhttps://elib.sfu-kras.ru/handle/2311/111299
Автор:
Didukh, S. L.
Лосев, В. Н.
Mukhina, A. N.
Trofimchuk, A. K.
Коллективный автор:
Институт цветных металлов и материаловедения
Кафедра композиционных материалов и физико-химии металлургических процессов
Дата:
2018-03Журнал:
Journal of Analytical ChemistryКвартиль журнала в Scopus:
Q3Квартиль журнала в Web of Science:
Q4Библиографическое описание:
Didukh, S. L. Неорганические оксиды с функциональными группами феррозина и ференен С для сорбционного концентрирования и определения железа(II) [Текст] / S. L. Didukh, В. Н. Лосев, A. N. Mukhina, A. K. Trofimchuk // Journal of Analytical Chemistry. — 2018. — Т. 73 (№ 3). — С. 228-235Текст статьи не публикуется в открытом доступе в соответствии с политикой журнала.
Аннотация:
Sorbents based on inorganic oxides sequentially modified with polyhexamethylene guanidine, ferrozine,
and ferene S are proposed for the preconcentration and determination of iron(II). Upon sorption
from solutions with pH 2.5–7.0, colored iron(II) complexes with ferrozine and ferene S, having broad bands
with maxima at 560 and 600 nm in the diffuse reflectance spectrum, respectively, formed on the sorbent surface.
Procedures for the sorption–photometric determination of iron(II) using diffuse reflectance spectroscopy
were developed. The limits of detection for iron(II), calculated by the 3s criterion were 0.005 and
0.006 μg per 0.1 g for sorbents based on silica with immobilized ferrozine and ferene S, respectively. The linearity
of calibration curves remains up to 5 and 10 μg per 0.1 g for sorbents based on silicon and aluminum
oxides, respectively. The procedures were tested in the determination of the total iron concentration in bottled
drinking waters and alcoholic drinks.